NAED details PV-1 tandem line ratings: 16,000 wafers/hour, 4.6 GW capacity
NAED Energy Holding has published production line ratings for its PV-1 tandem solar cell manufacturing line, specifying a throughput of 16,000 G12 half-cut wafers per hour. The company states that a six-line site would achieve an annual capacity of 4.6 GW, based on modelled cell efficiencies and standard operational assumptions.
NAED Energy Holding Inc. has detailed the production specifications for its PV-1 line, which manufactures T2X tandem solar cells. According to the company, the line achieves a throughput of 16,000 G12 half-cut wafers per hour.
The manufacturer states that a full site configuration comprising six such lines would yield an annual capacity of 4.6 GW.
Line Throughput and Process Rates
The PV-1 line operates at an index rate of 400 wafers every 90 seconds, a pace dictated by the ITO-1 PVD tool. Within the process flow, the PECVD module handles 18,950 wafers per hour, moving each batch on a 76-second index. At the top-cell stage, the line processes 200 windowed trays per hour, with each tray holding 80 wafers. These individual process rates combine to produce 116 million cells annually from a single PV-1 line, equating to 0.77 GW of output. The company provided no site-specific electricity generation data, noting that only typical U.S. values are available for such calculations.
Modelled Efficiency and Cell Specifications
NAED’s planning basis assumes 85% availability, 97.5% yield, and 30% cell efficiency for the PV-1 line. The modelled T2X cell efficiency stands at 34.4%, derived from parameters including a 1.969 V open-circuit voltage, 20.18 mA/cm² short-circuit current density, and a 0.867 fill factor. Each cell measures 210 × 105 mm, consistent with G12 half-cut dimensions.
| Metric | Value |
|---|---|
| NAED Modelled Efficiency | 34.4% |
| Highest Published Similar Size | 32–33% |
| Maxwell Certified (Jan 2026) | 32.38% |
| Cell Area | 217.2 cm² |
The 34.4% figure exceeds the 32–33% range cited for the highest published efficiencies of similar cell sizes. This modelled value is 2.02 percentage points higher than the 32.38% certified efficiency reported for Maxwell in January 2026. At standard test conditions of 1,000 W/m², a single cell generates 7.47 W at the modelled efficiency, compared to 6.61 W at the 30% planning basis and 5.62 W at 25.5%.
Site Capacity and Output Equivalents
The six-line configuration produces 7.7 million 600-watt panels annually, an output equivalent to supplying electricity to 650,000 U.S. homes. This calculation assumes a 17% capacity factor and average annual consumption of 10,500 kWh per residence. Note that measured throughput, yield, and efficiency results for the PV-1 site have not yet been published.
Background
On 13 November 2026, Luminity disclosed that NAED Energy Holding unveiled the PV-1 PECVD-V, a vertical in-line deposition system designed for tandem cell production. The company describes the unit as combining plasma-enhanced chemical vapor deposition with physical vapor deposition within a single shared-carrier line.
- The PV-1 PECVD-V achieves a throughput of 96,000 wafers per hour.
- Its vertical design keeps wafers upright during every processing stage.
- Malcom Longair, media and development lead at NAED, noted that this vertical layout enabled a doubling of throughput.
- By 13 November 2026, six of the thirteen process tools were finished, while seven remained in production.
- NAED handles the design of its process tools internally and machines them at its U.S. site.
- The firm’s operations span South Florida, New York, Nevada, and Indonesia.
- In July 2026, Longi set a global record of 35.5% efficiency for a perovskite-silicon tandem cell.
Refer to the initial report for specifics on the PV-1 PECVD-V platform. CleanTechnica mentioned on 16 November 2026 that NAED Energy Holding Inc. is the entity responsible for the NAED Nexus Core™.
Additional reporting: CleanTechnica.
Source: CleanTechnica. This article is an original Luminity report based on the linked source.
