Schneider Electric models 40% cut in global power costs by 2030s
A Schneider Electric report models that widespread adoption of solar and battery storage could reduce global electricity system costs by 40 percent by the 2030s. The study evaluates over 40,000 infrastructure scenarios to determine the economic benefits of distributed energy resources.
Schneider Electric’s Research Institute has published a report modeling the potential for solar and battery storage to lower global electricity costs. The study, titled “System Costs of Electricity: A New Baseline for the 21st Century Economy,” projects a 40 percent reduction in system costs by the 2030s.
The analysis is based on an evaluation of 40,500 distinct scenarios combining solar, battery, and grid infrastructure.
Baseline and Projected Costs
Schneider Electric’s Research Institute models the total system cost of electricity, accounting for generation, transmission, and distribution. The study establishes a baseline cost of $0.160/kWh. Current global average modeled costs stand at $0.145/kWh, representing a 10 percent reduction from that starting point. Looking ahead to the 2030s, the model projects total system costs will fall to $0.094/kWh. This represents a 40 percent decrease from the $0.160/kWh baseline.
The reduction is driven by the integration of solar and battery storage into the grid. As distributed energy resources expand, they currently supply 7,500 TWh, which accounts for 30 percent of global demand. A key mechanism for this cost reduction is the efficient use of existing infrastructure.
The analysis suggests that individual consumer choices align closely with broader system efficiency. In the modeled 2030s scenario, individual decisions are within $0.002/kWh of the system-wide optimum.
| Metric | Cost ($/kWh) | Reduction from Baseline |
|---|---|---|
| Baseline | 0.160 | 0% |
| Current Global Average | 0.145 | 10% |
| Projected 2030s | 0.094 | 40% |
Macroeconomic and Regional Variance
The report quantifies the macroeconomic stakes of this cost trajectory, estimating a potential 0.8% impact on global GDP in the 2030s.
In the United States, residential solar installation costs are three times the global average. This higher capital expenditure drives up the minimum modeled total system cost to $0.191/kWh, which is 20% above the $0.160/kWh global baseline. The study identifies the displacement of grid-supplied electricity as the primary mechanism for achieving cost reductions in such contexts.
As electricity demand grows from electric vehicles, heat pumps, air conditioning, and data centers, the ability to offset grid reliance becomes a critical cost driver.
Scenarios and Technical Constraints
Schneider Electric’s Research Institute outlines three distinct pathways for the 2030s and beyond, each yielding different cost trajectories:
- Scenario 1 (demand leads): Total system costs reach $0.173/kWh in 2035.
- Scenario 2 (supply leads): Total system costs stand at $0.168/kWh around 2030.
- Scenario 3 (coordinated growth): Costs peak at $0.163/kWh before falling to $0.105/kWh in 2050.
Mismatched battery sizing has the potential to increase total system costs by 35% above the current baseline.
Battery Sizing and Sector-Specific Economics
Commercial buildings, such as offices, consistently demonstrate the lowest total costs among the categories analyzed. This advantage stems from the alignment of their peak consumption periods with times of higher solar generation. In contrast, the study notes that the economic benefits of supply-led deployment, where solar and battery capacity expands before demand growth, emerge later as new electrified loads utilize available grid capacity.
The report also details the second primary mechanism for savings: the efficient use of existing infrastructure. Batteries reduce peak demand and smooth consumer load profiles, freeing up grid capacity. When new electrified loads utilize this available capacity, fixed infrastructure costs are spread across a larger volume of electricity sales, thereby lowering the cost per megawatt-hour. This dynamic improves asset utilization and reduces the need for new generation and grid infrastructure investments.
The study identifies three policy priorities for realizing these benefits. The analysis assumes that households, commercial buildings, and industrial facilities size their systems to minimize individual electricity bills, a decentralized approach that yields results close to the system-wide optimum.
What to watch
Because their peak consumption aligns with solar generation, these structures currently realize the lowest total costs.
Source: pv magazine. This article is an original Luminity report based on the linked source.
