Clean energy news from India and beyondSubmit a story
Solar

Third Pillar Power Building 22.5 MW Floating Solar Project in New York

Third Pillar Power is constructing North America’s first floating community solar project in Cortlandville, New York, with a total capacity of 22.5 MW DC. The three-phase development will utilize a 120-acre flooded mine pit to serve approximately 1,500 subscribers under New York’s community solar program.

Luminity News Desk ·

AI-generated illustration: Third Pillar Power Building 22.5 MW Floating Solar Project in New York
Image: AI-generated illustration (Luminity / Workers AI)

Third Pillar Power is constructing the Crown City Solar project in Cortlandville, New York. According to CleanTechnica, this development is designated as North America’s first floating community solar project.

Project Scope and Site

The Crown City Solar development is structured as a three-phase project, with each phase contributing 7.5 MW-dc to the total capacity. The facility is situated at Suit-Kote Corporation’s Polkville Crushed Stone Facility in Cortlandville, New York. This location utilizes a flooded mine pit covering approximately 120 acres, providing the necessary water surface area for the floating solar array. Under New York’s community solar program, the generated electricity will serve approximately 1,500 subscribers.

Advertisement

Technical Specifications and Partners

  • Designed to handle a ground snow load of 69 pounds per square foot.
  • D3Energy acts as the EPC firm for the project.
  • The system features Solar PV modules from Alps, elastic mooring systems by Hazelett Marine, and floats from Profloating.
  • Colas USA purchased Suit-Kote in October 2026.

Executive Perspectives

Jaimeet Gulati, CEO of Third Pillar Power, emphasized the existing utility of local water features, noting: "Every quarry and reservoir in this country already has a job to do." Stetson Tchividjian, Managing Director at D3Energy, commented that the Crown City Solar project "demonstrates what is possible with floating solar." The group secured initial site control in early 2024 and completed both site control and interconnection within a period of less than two years.

Engineering Firsts and Site Context

Crown City Solar brings distinct technical advancements to the American floating solar sector. By placing medium-voltage transformers and switchgear on purpose-built barges, the project executes a layout never before utilized in a domestic floating solar installation. This structural approach is intended to minimize the consumption of farmland, alleviate issues related to floodplain placement, and enhance electrical performance. The facility’s moniker references the adjacent town of Cortland, which is nicknamed the Crown City because it rests on a high plain exceeding 1,000 feet in elevation. In early 2024, Third Pillar Power pinpointed the roughly 120-acre inundated mine pit as an ideal location. Working alongside Suit-Kote, the Town of Cortlandville, and Cortland County, the team advanced the project from site acquisition and interconnection application to the construction phase in under two years. The host site functions as an operational sand and gravel quarry that also houses an asphalt plant and a storage terminal.

What to watch

Key construction milestones are anticipated for late 2026 and 2027. Crown City Solar 1 aims for mechanical completion by December 2026, with commercial operations projected to start in February 2027. The subsequent phases, Crown City Solar 2 and 3, are targeted to commence commercial operations in October 2027. Upon full operation, the facility is projected to prevent roughly 18,000 metric tons of carbon dioxide emissions each year.

Floating SolarCommunity SolarNew YorkThird Pillar Power

Source: CleanTechnica. This article is an original Luminity report based on the linked source.

Advertisement