Longi unveils 25.2%-efficient module with 680W output, triple-protection design
Longi has launched its Hi-MO X10 Full-Screen Triple-Protection module, achieving a 25.2% conversion efficiency and 680W maximum power output. The design incorporates structural changes to maximize light absorption and includes enhanced protection against environmental stressors.
On November 17, in Qingdao, China, Longi introduced its latest Hi-MO X10 Full-Screen Triple-Protection PV module. The manufacturer reports that this unit delivers a peak front-side power generation of 680 W, while attaining a conversion efficiency rate of 25.2%.
Design and Efficiency Gains
Measuring 2,382 mm by 1,134 mm, the Hi-MO X10 module achieves a front-side light-receiving area ratio of 98.58%. Longi credits four specific structural changes for the resulting 759.3 cm² increase in light capture. One primary modification utilizes a low-temperature film-welding method to remove 20 white gaps between cells. By keeping the height variance between parts under 130 micrometers, this approach reclaims 178 cm² of functional surface.
Additional efficiency stems from shifting three front-side busbars to the back, contributing 294 cm² to the light-receiving zone. The layout also minimizes internal distances; the gap between strings has been narrowed from 1.48 mm to 1 mm. The cell-to-frame creepage distance has been decreased from 12.9 mm to under 9 mm.
Performance and Durability
Longi reports that the Hi-MO X10 carries a standard power rating of 670 W, a figure the company highlights as exceeding comparable mainstream TOPCon modules of identical dimensions by 20 W. The engineering approach increases the rear-side light capture surface by 2.5%, enabling a maximum bifaciality of 85%. To control thermal stress, the integrated cell architecture keeps hotspot temperatures under 100 °C.
This module has secured certifications from both TÜV SÜD and TÜV Rheinland in accordance with IEC 61215 and IEC 61730 standards. Durability assessments involve hail-impact testing with 25 mm and 35 mm hailstones, verifying the panel’s resilience against severe weather conditions.
Market Traction and Warranty
- The module comes with a 15-year materials warranty and a 30-year linear power-output warranty.
- Maximum first-year degradation is capped at 1%.
- Annual linear degradation does not exceed 0.35% thereafter.
- Shipments to China’s commercial and industrial (C&I) market reached 1.5 GW in August 2026.
- Triple-protection variants represented over 50% of distributed PV shipments during the first nine months of 2026.
Longi Chairman Zhong Baoshen highlighted internal lab data indicating their hybrid interdigitated back-contact (HIBC) solar cell reached a 28.29% conversion efficiency, nearing the 29.4% theoretical ceiling for crystalline silicon.
Reliability Engineering and Cell Development
Longi’s triple-protection design specifically targets hotspots, electrical arcing, and microcracks in commercial and industrial rooftop installations. To mitigate arcing, the junction box employs laser fusion welding to eliminate metal-to-metal interface gaps that contribute to DC arc formation. The low-temperature welding process also reduces mechanical stress during transportation and installation, enhancing microcrack resistance.
Addressing rear-side shading from relocated busbars, the manufacturer replaced flat ribbons with round-wire ribbons and introduced precision-insulated sub-busbar break points. An alloy frame profile prevents the C-shaped section from shading cells. For hotspot protection, structures equivalent to bypass diodes are integrated within each hybrid passivated back contact (HPBC) 2.0 cell.
Beyond the module launch, Longi Chairman Zhong Baoshen positioned the full-screen design as complementary to cell efficiency gains.
Source: pv magazine. This article is an original Luminity report based on the linked source.
